Holcomb Feedlot Scraper

NEW HOLCOMB SCRAPER: SHAPING FEEDLOT SCRAPER

The Feedlot scraper is ideal for feed yard applications. Typical applications for this scraper are cleaning feed pens, uniforming hard and soft spots in pens, breaking hard ground and snow removal. Two versions of this scraper are available, the Without Chisels versions and the Chisel version. One of the key features on these scrapers are the bump rails on the sides to prevent catching on feed bunks, waterers and gate posts.

Shaper Feedlot Scraper Specifications:

Available Width of cut - 10 ft. to 20 ft.
Ground clearance - approximately 24" +
Tire size (rear) - Optional
Hydraulically raised and lowered
Doubles swivel hitch
Replaceable:

                    Cutting blade
                    Side Plates
                    Chisel Points
                    Pull Block
                    10,000 lbs. Hubs and Spindles

3 Pins remove chisels
Weight - 6000 - 8000 lbs
Hydraulic Outlets - 2 required
Hydraulic Flow - 15-20 GPM
Hydraulic Pressure - industry standard

CALL FOR AVAILABILITY

These are massive units compared to the other drag scrapers in the industry. The small ones even require a Large weighted tractor 150hp minimum to work at full capacity.